Prof. (Dr.) Anandkumar K. Patel

Assistant Professor, Government Engineering College, GES Class-II

CONTACT

Click here

AREA OF INTEREST

  • Production
  • Advanced Manufacturing Techniques
  • Manufacturing Processes
  • Unconventional Machining Processes

COURSE TAUGHT

  • Production Technology
  • Manufacturing Processes-I
  • Manufacturing Processes-II
  • Material Science and Metallurgy
  • Mechanical Measurement and Metrology

SKILL AND KNOWLEDGE

  • Manufacturing Engineering, 
  • Advanced Manufacturing System, 
  • Modeling and Simulation of Manufacturing System, 
  • Unconventional Machining
  • Casting Processes

PATENT

EDUCATION QUALIFICATION

  1. Ph. D. in Mechanical Engineering, Gujarat Technological University, Ahmedabad
  2. M. Tech. (Ganpat University) In Mechanical Engineering with Advanced Manufacturing Techniques, Year 2008 
  3. B E Mechanical Engineering from SPCE Visnagar, Year 2006 

WORK EXPERIENCE

U.V.Patel College of Engineering, Ganpat Vidyanagar, Kherva (2008-2009) as a Lecturer in Mechanical Engineering

U.V.Patel College of Engineering, Ganpat Vidyanagar, Kherva (2009-2012) as a Assistant Professor in Mechanical Engineering

Government Engineering College Palanpur as an Assistant Professor in Mechanical Engineering (2012 TO Till Date)

MEMBERSHIP

Life Member : Indian Society For Technical Education

SHORT TERM COURSES / SEMINAR / WORKSHOP ATTENDED

[gravityview id='4682']

PUBLICATIONS

[gravityview id='4653']

PUBLICATIONS

International Journal

  1. Patel, A.K., Vadher, J.A. Experimental Investigation of Effect of Process Parameters on the Tensile Strength of a Near Eutectic Aluminum-Silicon Alloy in Universal Centrifugal Casting Machine (UCCM). Inter Metalcast (2022). https://doi.org/10.1007/s40962-022-00899-2
  2. Anandkumar K. Patel, Jeetendrakumar A.Vadher Parametric Investigation on the Hardness of an Al-Si Alloy in newly invented setup of Centrifugal Casting (CC). International Journal for Research in Engineering Application & Management (IJREAM). ISSN : 2454-9150 Vol-09, Issue-03, June 2023.
  3. Experimental investigation on cutting force during end milling of AISI D2 tool steel using AlCrN coated tool. materials today: procedings Volume 80, Part 2, 2023, Pages 1397-1402 https://doi.org/10.1016/j.matpr.2023.01.153

International Conference

  1. Dr. Pradipkumar S. Chaudhari, Dr. Chirag P. Patel, Dr. Anandkumar K. Patel, “Significant Historical Evolution of Unconventional Machining Techniques”,Revitalising and Rejuvenating Bhartiya Knowlwdge System for Making Bharat Vishwaguru by 2047, March 22-23,2024, Ganpat University.
  2. Mr. Anandkumar K. Patel “Effect of Powder Mixed Dielectric Fluid on Surface Modification during Electrical Discharge Machining (EDM): A Review” Emerging Trends in Mechanical Engineering (ICETME-2011) 24-26, February, 2011.
  3. Mr. Anandkumar K. Patel “Prediction of metal removal rate in electro discharge machining using artificial neural network” Emerging Trends in Mechanical Engineering (ICETME-2011) 24-26, February, 2011.

National Conference

  1. Paper presented in the National Conference on Design, Dynamics & Manufacturing in SLIET, Longowal, PUNJAB.
  2. Mr. Anandkumar K. Patel “Prediction of metal removal rate in electrical discharge machining using artificial neural network”, Advancement & Futuristic Trends in Mechanical and Material Engineering, 30th April & 1St May, 2010, Yagyavalkya Institute of Technology Jaipur, Rajasthan.
  3. Mr. Anandkumar K. Patel “A review of weld strength prediction of resistance spot welding using artificial neural network”, Advancement & Futuristic Trends in Mechanical and Material Engineering, 30th April & 1St May, 2010, Yagyavalkya Institute of Technology Jaipur, Rajasthan.
  4. Mr. Anand K. Patel, Mr. Vijay N. Modi, Mr. J. P. Patel “A regression analysis of the effect of turning parameters on surface roughness”, Emerging Trends in Mechanical Engineering (ETME-2008) 28-29 March,2008, G. H. Patel College of Engineering & Technology Vallabh Vidyanagar, Gujarat.
  5. Mr. Anandkumar K. Patel, Mr. Sandip S. Patel, Prof. J. M. Prajapati, “Evaluation of End Effectors Positioning of the ARISTO Robot by Analytical Approach Using MATLAB 7.0” Emerging Trends in Mechanical Engineering (ETME-2008) 28-29 March,2008, G. H. Patel College of Engineering & Technology Vallabh Vidyanagar, Gujarat.
  6. Mr. Anandkumar K. Patel, Mr. Sandip S. Patel, Prof. J. M. Prajapati “Evaluation of Position and Orientation of End-Effector of Serial Manipulator Based Puma Robot Using Analytical Approach by MATLAB 7.0”, Emerging Trends in Mechanical Engineering (ETME-2008) 28-29 March,2008, G. H. Patel College of Engineering & Technology Vallabh Vidyanagar, Gujarat.
  7. Mr. Anandkumar K. Patel “Fatigue analysis of ball mill shaft with multi axial dryness and material testing”, Recent Advancements in Engineering & Technology, 26th April, 2008, Government Engineering College, Ajmer, Rajasthan.
  8. Mr. Anandkumar K. Patel “Quality Prediction in Resistance Seem Welding Using Artificial Neural Network”, Recent Advancements in Engineering & Technology, 26th April, 2008, Government Engineering College, Ajmer, Rajasthan.

ADDITIONAL ACTIVITY

Reviewer

International Journal
  1. Patel, A.K., Vadher, J.A. Experimental Investigation of Effect of Process Parameters on the Tensile Strength of a Near Eutectic Aluminum-Silicon Alloy in Universal Centrifugal Casting Machine (UCCM). Inter Metalcast (2022). https://doi.org/10.1007/s40962-022-00899-2
  2. Anandkumar K. Patel, Jeetendrakumar A.Vadher Parametric Investigation on the Hardness of an Al-Si Alloy in newly invented setup of Centrifugal Casting (CC). International Journal for Research in Engineering Application & Management (IJREAM). ISSN : 2454-9150 Vol-09, Issue-03, June 2023.
  3. Experimental investigation on cutting force during end milling of AISI D2 tool steel using AlCrN coated tool. materials today: procedings Volume 80, Part 2, 2023, Pages 1397-1402 https://doi.org/10.1016/j.matpr.2023.01.153
International Conference
  1. Dr. Pradipkumar S. Chaudhari, Dr. Chirag P. Patel, Dr. Anandkumar K. Patel, “Significant Historical Evolution of Unconventional Machining Techniques”,Revitalising and Rejuvenating Bhartiya Knowlwdge System for Making Bharat Vishwaguru by 2047, March 22-23,2024, Ganpat University.
  2. Mr. Anandkumar K. Patel “Effect of Powder Mixed Dielectric Fluid on Surface Modification during Electrical Discharge Machining (EDM): A Review” Emerging Trends in Mechanical Engineering (ICETME-2011) 24-26, February, 2011.
  3. Mr. Anandkumar K. Patel “Prediction of metal removal rate in electro discharge machining using artificial neural network” Emerging Trends in Mechanical Engineering (ICETME-2011) 24-26, February, 2011.
National Conference
  1. Mr. Anandkumar K. Patel “Prediction of metal removal rate in electrical discharge machining using artificial neural network”, Advancement & Futuristic Trends in Mechanical and Material Engineering, 30th April & 1St May, 2010, Yagyavalkya Institute of Technology Jaipur, Rajasthan.
  2. Mr. Anandkumar K. Patel “A review of weld strength prediction of resistance spot welding using artificial neural network”, Advancement & Futuristic Trends in Mechanical and Material Engineering, 30th April & 1St May, 2010, Yagyavalkya Institute of Technology Jaipur, Rajasthan.
  3. Mr. Anand K. Patel, Mr. Vijay N. Modi, Mr. J. P. Patel “A regression analysis of the effect of turning parameters on surface roughness”, Emerging Trends in Mechanical Engineering (ETME-2008) 28-29 March,2008, G. H. Patel College of Engineering & Technology Vallabh Vidyanagar, Gujarat.
  4. Mr. Anandkumar K. Patel, Mr. Sandip S. Patel, Prof. J. M. Prajapati, “Evaluation of End Effectors Positioning of the ARISTO Robot by Analytical Approach Using MATLAB 7.0” Emerging Trends in Mechanical Engineering (ETME-2008) 28-29 March,2008, G. H. Patel College of Engineering & Technology Vallabh Vidyanagar, Gujarat.
  5. Mr. Anandkumar K. Patel, Mr. Sandip S. Patel, Prof. J. M. Prajapati “Evaluation of Position and Orientation of End-Effector of Serial Manipulator Based Puma Robot Using Analytical Approach by MATLAB 7.0”, Emerging Trends in Mechanical Engineering (ETME-2008) 28-29 March,2008, G. H. Patel College of Engineering & Technology Vallabh Vidyanagar, Gujarat.
  6. Mr. Anandkumar K. Patel “Fatigue analysis of ball mill shaft with multi axial dryness and material testing”, Recent Advancements in Engineering & Technology, 26th April, 2008, Government Engineering College, Ajmer, Rajasthan.
  7. Mr. Anandkumar K. Patel “Quality Prediction in Resistance Seem Welding Using Artificial Neural Network”, Recent Advancements in Engineering & Technology, 26th April, 2008, Government Engineering College, Ajmer, Rajasthan.
error: Content is protected !!